Tag Archives: Concept Design

This WFH desk concept bucks the trend to offer some peace of mind

Posted on by

Sometimes, the traditional and the familiar can offer a calming refuge against a stressful storm of changes.

The past two years have forced many changes in the world, not all of them warmly welcomed. Work, in particular, has taken on a new form, one that finally proved that some work could actually be done at home. But as the world changed rapidly, so did the need for resources and tools that adapted to that new world order. This sea of changes gave way to a flood of new products in dizzying variety and numbers. One idea, however, tries to swim against the current to offer something with a familiar face that inspires confidence and offers a bit of tranquility.

Designer: Can Türker

As more and more people worked and studied at home, the venerable home desk was no longer enough to support the added demands. This gave birth to a new breed of desks and office equipment that boasted creative ways to improve productivity or maximize space, some of them bordering on the gimmicky. While a lot did lean more towards minimalist aesthetics, more offer advanced features that ironically complicated life and added to the mental burden of already stressed-out people.

The Bold Desk concept is bold in two ways. The designer’s expressed intent is to make the desk inspire boldness in facing the unknown of new work from home arrangements. Intentionally or not, the desk is also bold for eschewing complex features and gimmicks to present something immediately familiar and comfortable.

Nothing says familiar better than a wooden desk, and the Bold Desk’s choice of material scores points for both sustainability and design. It offers an immediate connection between the desk and the user, and its organic origin evokes feelings of warmth and life compared even to wood that’s been painted over with unnatural hues. The drawer and the bottom side also have a soothing effect, thanks to their curved edges. Rather than cram everything into a space-efficient area, the wide surface of the desk also gives some space to breathe.

That’s not to say that the Bold Desk is plain and unremarkable. It puts an emphasis on storage space to help hide away the clutter, even if temporarily. The inconspicuous gap on its back also offers a way for cables and power cords to snake out of sight and out of mind. The Bold Desk, despite its name, focuses on being subtle and unobtrusive, putting an equal value on people’s mental health as much as their productivity.

The post This WFH desk concept bucks the trend to offer some peace of mind first appeared on Yanko Design.

A solar-powered weighing scale concept to help save the lives of babies in remote communities

Posted on by

It’s easy to take for granted simple things like keeping track of our weight. For babies in hard-to-reach areas, however, that can be a matter of life or death, and this portable solar scale tries to help tip the scales in the baby’s favor.

The first few weeks of an infant’s life are critical not only to their growth but also to their survival. Many parents might take for granted the many tools and resources available to them in watching over babies during this crucial period, conveniences that are not even accessible to remote and socio-economically challenged communities. Even something as basic as a weighing scale for infants is rare and difficult to come by, something that this product concept is trying to solve in the most efficient way possible.

Designer: Craig McGarrell

According to the World Health Organization (WHO), about 2.4 million children around the world died within the first month of their lives. While there are many factors that contributed to this number, a very big factor in remote regions is the ability to monitor the baby’s weight during that month. Weighing scales used in these areas are often old-fashioned analog scales that can be inaccurate and too heavy to move from one community to another easily. This makes it difficult or nearly impossible for healthcare workers to keep a close watch on babies’ weights, leading to unfortunate neonatal deaths.

The ROOTS Solar Scale concept is an attempt to modernize this critical medical equipment without making them too complicated to use or too expensive to maintain. For one, it is completely digital, which removes the risk of getting inaccurate readings over time. It is also solar-powered so that electricity won’t be an issue.

The design is also meant to be lightweight and easy to carry around, even on foot, taking the form of a backpack when not in use. The weighing bowl inside creates a safe structure for the infant to lie in, while the stiff hinge prevents the lid from accidentally closing with the child still inside.

The Solar Scale is meant to be a cost-effective solution that is easy to make and repair, thanks to having very few parts. Despite relying mostly on solar power, the design isn’t completely sustainable, as it relies heavily on plastic, particularly to give the weighing bowl a smooth surface that will be gentle on the baby’s skin while also easy to clean.

The post A solar-powered weighing scale concept to help save the lives of babies in remote communities first appeared on Yanko Design.

This insulin pen cap concept tries to make diabetes management less tedious

Posted on by

There’s still no escaping having to prick yourself to deliver life-saving insulin, but that doesn’t mean keeping track of your diabetes data has to be stuck in the past either.

Smartwatches and fitness trackers have become a lot more sophisticated in the past few years, but there are still some medical conditions that are still outside the grasp of these devices. Accurately measuring blood pressure, for example, still requires some sort of inflatable cuff. Diabetes management is even more painful, almost literally, because of the need to draw blood and inject the medication. We’re still far from reaching that non-intrusive goal of diabetic management, but one seemingly innocuous product is trying to make that process a little bit smarter.

Designer: Luca Lili Takacs, Csilia Antal for X-Plast

Injecting insulin into the body used to require some medical know-how, but anyone with diabetes can now administer a dose on their own. There are also more alternatives these days to the typical syringes and pumps, with the insulin pen becoming to most convenient and most stylish option. All of these methods, however, still require no small amount of manual data tracking, something that the INDOO smart insulin pen caps are trying to address.

These caps look like gigantic versions of typical pen caps, which isn’t surprising given how insulin pens are equally gigantic compared to the handwriting tool. A box contains different caps designed to fit the different types of insulin pens available in the market today. This makes it easy to switch brands without having to buy a new set. The electronics part can simply be transferred from one cap to another.

The INDOO isn’t just decorative, of course, and it turns any insulin pen into a smart insulin pen. It helps with the management and tracking of doses and insulin levels, a critical activity that can mean life or death for a diabetic patient. As with any smart accessory, it has to be paired with a smartphone app that will offer notifications, warnings, and suggestions that could save the person’s life.

There are some insulin pens that are starting to offer smart features, but the INDOO offers a solution that won’t force you to change brands unless you really need to. Considering how some insulin pens do get thrown out after a period of use, these savings add up in the long run.

The post This insulin pen cap concept tries to make diabetes management less tedious first appeared on Yanko Design.

Harry Potter Nimbus 2022 concept takes the classic broomstick to new heights

Posted on by

If you’re going to ride a broomstick anyway, you might as well make sure you look good on it.

Although it eventually ended up being a tale that could give younger kids some nightmares, Harry Potter possessed the classic elements of children’s fairy tales when it came to witches and wizards. You hand long-flowing robes, pointy hats, wands, and, of course, flying broomsticks. The wizarding world of Harry Potter hasn’t exactly been receptive to technological advances, and it can be clearly seen even the most mundane of these magical tools. Naturally, someone just had to give Harry Potter a modern makeover, resulting in a broomstick no wizard or witch would want to pass up.

Designer: Simone Caronni/3L Design

Harry Potter tried to stay true to the tropes of witches and wizards, even as it grew into adulthood, from kids’ books to YA novels. The broomstick, for example, strayed little from the traditional designs of medieval broomsticks, complete with crooked shafts and unmanageable brushes. There’s plenty of room for design exploration and experimentation, of course, and the Nimbus 2022 concept sticks out as one that is the most believable, especially to one that has seen electric scooters of this non-fictional age.

Designer Simone Caronni didn’t have to go far and took inspiration from the things that are already in Harry Potter’s world as well as ours. The basic bent profile is still present, almost a nod to the natural shapes of wands that wizards use. The concept does give the vehicle, if one could call it that, a brush-up, almost literally. The aluminum material of the shaft plus the nearly uniform strands of the brush make it look more like an artist’s paintbrush or even a makeup brush.

The most critical upgrades, however, are the addition of a proper seat and some semblance of modern electronics. Witches and wizards have been bearing the pain of riding on a stick for centuries, so it’s high time that comfort becomes a priority in the design of a broomstick. The handle also shows the equivalent of an instrumentation panel, but we’ll presume it’s magic-driven instead of electricity-powered. Of course, the design has room for customization, or rather for proudly showing off our House colors.

The Nimbus 2022 is an interesting take on what was one of Harry Potter’s most iconic props, though it’s also easy to see how this new design probably won’t sit well with the Ministry of Magic. The modern design and features definitely bring the rather uncomfortable mode of transportation to the present age, but it reeks too much of Muggle technology to pass without comment among the wizarding population.

The post Harry Potter Nimbus 2022 concept takes the classic broomstick to new heights first appeared on Yanko Design.

This levitating smart assistant concept makes smart speakers look antiquated

Posted on by

What better way to show how smart assistants are the future than with a futuristic speaker that seems to defy the laws of gravity.

When Amazon came out with the first-ever smart speaker housing a smart assistant, there was a bit of bewilderment over its place in our modern life. Half a decade later, it almost seems inconceivable to have a modern home that doesn’t have either some smart speaker or at least a way to get in touch with Alexa, Google Assistant, Siri, and everything in between. While these smart assistants have evolved in the past years, the design of speakers hasn’t seen many notable changes in terms of design. One concept, however, breaks out of the mold and aims to make the smart assistant truly look futuristic while still setting a foot down on familiar and comforting materials.

Designer: Alex Casabò

That’s not to say that smart speakers are ugly, especially since many of them are intentionally designed to be more aesthetic than most speakers. The shapes for these speakers, however, seem to be limited to a few basic forms like cylinders or rectangles. There are some exceptions, like the BeoSound Emerge, but this beautiful book-like audio product is more the exception than the norm.

You don’t have to go overboard to envision a more interesting take on smart speakers. Floating speakers aren’t exactly new by now, though they are pretty much novelty items. Designer Alex Casabò, however, took that idea and put a familiar smart speaker design convention, creating something that is both mystifying but strangely also calming.

Unlike most floating speakers, the sphere that hovers above its metallic base is covered with what looks like a coarse material that gives the impression that it’s made of granite or something similar. In addition to evoking a sense of wonder over something heavy that floats in the air, the somewhat organic and rough texture creates a satisfying visual contrast to the smooth and lustrous box beneath. It also calls to mind the familiar design of some smart speakers, particularly those that use fabric to blend in with some room decorations.

The concept also has room for visual feedback, not just in the form of icons but also text. This reinforces the image of something that is so futuristic it almost looks like magic, creating a beautiful contrast in themes. With an organic sphere floating on top of a metallic block and a design that’s novel yet also familiar, the levitating smart assistant concept is almost like a product of contrasting elements that have been harmoniously mixed to enchanting effect.

The post This levitating smart assistant concept makes smart speakers look antiquated first appeared on Yanko Design.

This fashionable smartwatch keeps track of your sleep and the air quality in your room

Posted on by

While most wearables are more focused on what you do when you are awake, this smartwatch is more concerned about getting the best sleep that you can.

Smartwatch sales have exploded in the past two or so years, eclipsing even the older smart fitness band categories, thanks to a sudden interest and obsession over personal health. While it’s good that people are now more conscious about staying active even at home, exercise, movement, and even diet don’t complete the whole fitness picture. Sleep plays an equally important role in staying healthy, and this smartwatch is just as concerned about that as it is with the rest of your body, including the air you breathe in at home.

Designer: Heyok Shin

Most smartwatches these days do keep track of sleep quality or length, but mostly as an afterthought. Sleep, however, is a critical part of our health, and length isn’t the only relevant metric to keep track of. In fact, different people need different amounts of sleep, so there’s no one size fits all recommendation. The ZOS smartwatch tries to take the mystery out of sleep management and analyzes sleeping habits in order to recommend better sleeping times and conditions. It also has features like smart alarms and even ASMR audio recordings to help induce sleep.

The ZOS smartwatch concept doesn’t exactly look like your typical smartwatch, especially with its elongated screen. It is, however, designed for maximum comfort since you are supposed to be wearing it even in your sleep. The choice of magnetic straps and leather material was made with that in mind, ensuring the wearer’s wrist won’t be irritated in the middle of the night, disrupting their sleep.

Sleep management is actually just one-half of the ZOS smartwatch’s purpose. The other half ties into the designer’s other concept, the CLOSSY air purifier and plant care cabinet in one. This smart home concept product can analyze the quality of air inside a room and keep an eye on the plant that will also help purify the air. While these pieces of information can be seen from a smartphone, the ZOS smartwatch is imagined to be the perfect companion for the CLOSSY product.

The post This fashionable smartwatch keeps track of your sleep and the air quality in your room first appeared on Yanko Design.

Nintendo phone concept is a glimpse of a dream that will never come to be

Posted on by

Although it’s unlikely the company will ever go down this route, this concept smartphone is easily every Nintendo fan’s dream.

Although it is hardly Nintendo’s first handheld gaming device, the Nintendo Switch not only sparked the imagination but also drove sales sky-high when it launched back in 2017. Since then, the gaming giant has continued to milk that cow for all it’s worth, ignoring clamor for a long-overdue Switch Pro upgrade. Some Nintendo fans, however, actually wished that the company went smaller rather than bigger, bringing its iconic characters and titles to phones. Nintendo has sadly withdrawn from mobile games, but one fan tried to envision the best combination of Nintendo’s spirit and mobile technology.

Designer: Lee Huang

In terms of technical capabilities, Nintendo definitely has what it takes to make a Nintendo Phone. The Switch, after all, is pretty much a tablet with custom software and a very successful gimmick in the form of the Joy-cons. Nintendo could have also easily partnered with some smartphone maker for a “Nintendo Edition” phone, but that will probably pale in comparison to one that bears Nintendo’s iconic design language.

It’s easy enough to actually mistake this Nintendo Phone concept as a toy, especially with its use of soft pastel colors and round buttons. That’s precisely the point, though, because this is a handheld gaming device first and foremost, a phone only second. It might look out of place in a boardroom meeting unless you’re the type who will flaunt their inner gamer in any setting.

Those colorful rear plates are also the perfect palette for branding, like the special edition consoles that Nintendo and its competitors would occasionally put out. There’s also an opportunity for slapping on skins, of course, and you won’t be as hesitant to put a Pokemon-themed skin on this as you would a regular phone. There’s also plenty of room for accessories, including game controllers, given how more open phone designs are compared to something like the Switch.

The rather sad reality is that this concept will remain just that, a concept that will tickle Nintendo fans’ fancy and make them yearn for better days. Nintendo hasn’t had much success with mobile games for phones, and it might not have the capability to run an Android spin of its own. For now, Nintendo fans can take comfort in knowing that their community has no shortage of creative people who can share their dreams of things Nintendo could do but never did.

The post Nintendo phone concept is a glimpse of a dream that will never come to be first appeared on Yanko Design.

Logitech’s spaceship-like mouse concept is designed to save your wrist

Posted on by

There is no shortage of ergonomic computer mice that claim to deliver the most painless experience, but this concept turns the solution on its head and transforms the mouse into something completely different.

With the advent and prevalence of laptops and their trackpads, computer mice have mostly been pushed to the background. There are, however, scenarios where the completely flat and smooth surfaces of these trackpads are not only impractical but almost unusable, like with games. Regardless of the reasons, computer mice haven’t completely vanished from the market, but neither have they evolved significantly. They are still an ever-present risk to our wrists, and designers have repeatedly gone back to the drawing board to concoct the most ergonomic mouse around. For one designer, the answer ironically turned out to be quite different from a mouse.

Designer: Jason Wang

Although they have become the essential ways we interact with computers, the keyboard and the mouse are not the healthiest methods for our hands and wrists. Repetitive strain injury and carpal tunnel syndrome can be crippling for today’s generation whose lives and work depend on computers. There have been quite a few ergonomic mice designs available today, including the Lunar Artefacts Pointer Instrument that we reviewed recently, but there is plenty of room for improvement.

Designer Jason Wong went back to the drawing board to reimagine what an ergonomic mouse would look and feel like without being limited to the traditional concept of a mouse. He started out with something that looked a lot like many ergonomic mice, with cutouts and flaps for supporting the fingers. From there, however, things took on a rather strange turn that led to something that is both from the past and the future.

After testing out what looks like a mouse on a stand, Wong ended up with what he describes as a vertical mouse joystick design. Unlike a typical joystick, which predates the mouse, the person won’t need to keep a grip on the device and simply lay their hand on the supporting structure. There is even wrist support to help keep your arm from getting strained while in the position.

While the alien-like form gives the hand and wrist some structural support, the materials that Wang chose are meant to offer both comfort and visual identity. A fabric mesh covers the hand and wrist support surface for comfort, while rubber coating offers a better grip. There are shifts in material from metal to plastic to create a visual break, though that, unfortunately, does imply the use of some unsustainable materials.

This concept, which the designer dubs the Logitech MX K01, is truly unorthodox in its appearance and design. Its ergonomics try to use the natural vertical position of the hand to avoid straining the wrist, while the flowing lines of the structure provide not only points of visual interest but also ergonomic support for the hand. That said, it’s a concept that probably needs proper clinical testing to verify its ergonomic value, though, at this point, it can hardly be called a mouse anymore.

The post Logitech’s spaceship-like mouse concept is designed to save your wrist first appeared on Yanko Design.

Razer’s all-in-one modular gaming desk design is a sci-fi dream come to life

Posted on by



If you find yourself having trouble juggling different desks for your different roles, then Razer’s latest dream might be yours as well.

All of us have different roles to play in life. Some of those are easily compartmentalized, thanks to being confined to a specific location. With new arrangements that have left many people stuck at home, however, the boundaries between work, study, and play have started to get muddled. While there are those that advocate keeping different spaces and even desks for different tasks, most people probably have to live with just one at home. If Razer’s Project Sophia concept ever becomes a reality, however, that will be a problem of the very distant past.

Designer: Razer

Whether you have one desk or three, you most likely have different setups for the different roles you play. Work might require you to be professional and productive, but video or audio streaming requires specialized tools to keep quality up and noise down. Switching between setups and desks will always be a chore, and it would be nice if a single desk could reconfigure itself depending on the task at hand. While an autonomous workspace is probably still a fantasy, Razer is envisioning the next best thing.

Project Sophia is an all-in-one modular desk concept that employs strong magnets and crafty electronics to reconfigure its functionality, depending on the task at hand. The desk itself is actually a computer in disguise, powered by an Intel processor and NVIDIA graphics to drive the modular system. There’s even a huge OLED screen, either 66 or 77 inches, so you really have a complete computer setup even without the modules.

Those modules, however, are the magic sauce to Project Sophia. These snap beneath the desk’s glass surface and offer a wide variety of functionality for different use cases. The idea is that you can quickly swap out modules when you switch from work to play to your other work as a streamer, no need to leave your desk. Except perhaps to get the modules you need and reconfigure the desk.

Razer said that there are 13 separate modules, including a programmable hotkey, media controls, system monitors, and a wireless charger. The company even says there’s even a cup warmer module available for avid coffee fans. And, in typical Razer fashion, there is an RGB LED strip lining the desk that people can customize to fit the mood.

If these images make you fantasize about futuristic dashboards and cockpits, you wouldn’t really be far from the truth. Just like how most of those are fantasy, Razer’s Project Sophia is sadly still just a concept at this point, but it’s an exciting concept nonetheless, especially for those who find themselves with different shoes to fill in a single day.

The post Razer’s all-in-one modular gaming desk design is a sci-fi dream come to life first appeared on Yanko Design.

This black beauty is a speaker concept that deserves to stay indoors

Posted on by

This black and gold box admittedly has appeal, but it might make you think twice about bringing it outside.

Long gone are the days when speakers were expected to be nothing more than big black boxes with one or two circles that throb to the beat. Thanks to revolutions in manufacturing, audio technology, and product design, speakers today come in all shapes and sizes that are often designed with specific use cases and setups in mind. Some, for example, are meant to disappear into the background, while others demand to be put on display. Still, others are made to rough it out in the great outdoors, and this rather striking speaker doesn’t seem to fit that bill.

Designer: GOAT1

Looks can be deceiving, as they often say, but there are a few standard traits you’d expect to see on products designed for outdoor use. Dust and waterproofing definitely come to mind, which often translates to very tight designs that leave very few places for dust and water to enter. A speaker with a large grille, physical knobs, and a variety of exposed ports is probably the last thing you’d think of.

And yet, that is what the Prince Dark Horse is meant to be, designed as part of an outdoor sound system conceptualized by GOAT1. Make no mistake, the design is handsome and seems to have the perfect blend of hard, cold edges and luxurious golden accents. In other words, just like a majestic black horse.

In contrast to the still-dominant minimalist aesthetic, the Prince Dark Horse almost throws some contrasting elements into the mix. The asymmetrical golden grille contrasts perfectly with the nearly black body of the speaker. The handle’s textured surface suggests a soft, leather-like material that is juxtaposed with the body’s hard edges and corners. Circles for knobs and ports face-off with rectangular buttons on the top panel that combines analog and digital interfaces in a single location. It’s almost like a cacophony of visual elements made to harmoniously fit together, just like some of the music that will be blasting out of it.

Nearly the size of a MacBook, the speaker is clearly something that’s meant to be carried around, even if not in your bag. It definitely goes well with other accessories that share similar natural tones, some of which might also use materials that don’t do well under the elements. The Prince Dark Horse is probably from the same herd and is something you’d only want to bring and use outdoors with extreme care.

The post This black beauty is a speaker concept that deserves to stay indoors first appeared on Yanko Design.