Custom Lexus GX bakes oven fresh pizzas in the boot, comes with luxe appliances and exclusive Monogram interiors

2024 Lexus GX as a 7-seater off-road SUV has hit the right notes with the most critical reviewers after the official launch. The car carries forward the Japanese automaker’s promise of luxury with performance. To bring something unique to the world of a kitchen on wheels, Lexus has teamed up with GE’s Monogram (luxury appliance division) to fit a Smart Flush Heart Oven in the rear of the bossy car.

The luxury culinary experience on board this off-road SUV seems like an odd combination when we talk of practicality since the vehicle will tread inhospitable dirt tracks bouncing around. That though fades away quickly as soon as one lays eyes on the exquisite vehicle, inside out. The interiors are embellished with a stainless-steel, black, and brass color scheme, with gold badges, gold accents. That’s a good start for the adventure-oriented GX, but there’s a lot more, so read on.

Designer: Lexus and GE Monogam

The idea here is to convert the capable off-roader into a bespoke culinary experience on wheels” right from the moment you enter the vehicle, drive it and then take a break to eat some delicacies. Monogram doesn’t just stop at the rear, the whole interiors are done in the matching theme with dual-tone camel leather seats and door panel trims, complemented by the brass and titanium metal along with the Dekton slate stone accents. The interior has numerous luxury appliances and accessories to elevate the whole experience. According to Lexus, the one-off GX comes fitted with a rare heated ice press (between the rear seats) that makes spherical ice cubes.

What makes it a lip-smacking proposition is the boot having a Smart Flush Hearth Oven with a 30-inch display. The electric oven is custom-made to mimic the performance of a wood-fired brick oven to bake pizzas and other eatables. Of course, you’ll need something to drink along, so there are pressured fitted cutouts on the side panels to store wine, bourbon, glasses and bottle openers. To complement this, Monogram has fitted a bar complete with a bar kit, glassware, bitters and a folding cutting board. Other essentials like cutlery and trash bin are houses inside the truck for quick retrieval. Everything is finely trimmed with quilted leather and carpeting, with the addition of a Dekton slate stone countertop-like plating station.

The post Custom Lexus GX bakes oven fresh pizzas in the boot, comes with luxe appliances and exclusive Monogram interiors first appeared on Yanko Design.

This automated mushroom chamber uses smart technology to grow and harvest your own mushrooms at home!





Mella is a household mushroom fruiting chamber that uses smart technology to automatically grow and harvest a variety of mushrooms.

Over the past couple of years, our homes have become test kitchens for everything from colorful sourdough bread to dalgona coffee. Now it’s time to make some counter space for an at-home smart mushroom fruiting chamber.

Mella, an innovative new kitchen appliance from FirstBuild, a co-creation community backed by GE appliances, uses smart technology to grow and harvest your own mushrooms at home.

Smart technology has made mealtime simpler than ever. With smart technology, we can program our appliances to do the hard parts for us. Mella’s automated programming brings just the right amount of fresh air and humidity into the fruiting chamber to allow mushrooms to mature at the right time and speed, growing into full-size, edible mushrooms. With automated technology running the show, seasoned mycelium harvesters and recreational growers can sit back and enjoy the show.

Located on the outside of Mella’s chamber, the water basin can easily be refilled to funnel in just the right amount of water to combine with fresh air and become humidity for optimal mushroom-growing conditions. Then, the hygrometer indicates the humidity levels inside the chamber so that users can always keep tabs on the best conditions for harvesting mushrooms. Four LED lights also pour light into the chamber to ensure the mushrooms receive the necessary amount. Finally, a WiFi-compatible program controller allows users to adjust Mella’s settings as they see fit to help mushrooms grow.

Summing up Mella in their own words, the team behind FirstBuild notes, “Made for those mad about mushrooms Mella controls and automates the inputs necessary to grow delicious, edible mushrooms in the comfort of your home.”

Designer: FirstBuild

 

GE’s smart home brand expands beyond lighting with a security camera

GE sold its lighting business to smart home veteran Savant this spring, and that’s about to have a significant impact on the devices you can buy. The newly owned GE Lighting is ditching the slightly awkward C by GE branding in favor of the Cync name...

The best tech gifts to upgrade your home theater

With movie theaters largely off the table and new game systems on the way it’s the perfect time to upgrade to your home theater. Whether you’re looking for a $50 stocking stuffer, a big-ticket new TV or something in between there are plenty of ways t...

Ventilator companies are opening up critical repair documents to the public

After being called out by the US Public Interest Research Group (PIRG), more ventilator manufacturers are sharing critical repair information. Last month, the PIRG asked device manufacturers to release all repair documentation for essential medical e...

How NOT to Create a User Interface

With more and more smart devices in our homes, the need to occasionally reset or troubleshoot them comes along with that. But how do you interact with a device that has no keyboard, mouse, or other input mechanism when it can’t connect to your network? Well, don’t do it like GE did with its C “smart” lightbulbs.

This video which is designed to show how to reset your C by GE bulbs is like a textbook lesson in what not to do in user interface and usability design. I could explain it first, but it’s way funnier to watch the video for yourself:

Apparently, they couldn’t be bothered to include some kind of reset switch, or a simple on/off sequence, and instead, resetting your C by GE light bulb is more complicated than learning the Konami code. Seriously, these are the OFFICIAL directions posted on their YouTube channel:

Your bulbs are running on firmware version 2.8 or later (you can find your bulb firmware version by tapping on the device in your C by GE app).

We recommend counting with Mississippi (1 Mississippi, 2 Mississippi, 3 Mississippi, etc.).

Start with your bulb off for at least 5 seconds.
1. Turn on for 8 seconds
2. Turn off for 2 seconds
3. Turn on for 8 seconds
4. Turn off for 2 seconds
5. Turn on for 8 seconds
6. Turn off for 2 seconds
7. Turn on for 8 seconds
8. Turn off for 2 seconds
9. Turn on for 8 seconds
10. Turn off for 2 seconds
11. Turn on
Bulb will flash on and off 3 times if it has been successfully reset.

TIP: If the factory reset above was unsuccessful, you might have an older version of the C by GE bulb. Please follow the instructions below to reset.

Bulb Reset Sequence – for firmware version 2.7 or earlier:
We recommend counting with Mississippi (1 Mississippi, 2 Mississippi, 3 Mississippi, etc.).

Start with your bulb off for at least 5 seconds.
1. Turn on for 8 seconds
2. Turn off for 2 seconds
3. Turn on for 2 seconds
4. Power off for 2 seconds
5. Turn on for 2 seconds
6. Power off for 2 seconds
7. Turn on for 2 seconds
8. Power off for 2 seconds
9. Turn on for 8 seconds
10. Power off for 2 seconds
11. Turn on for 8 seconds
12. Power off for 2 seconds
13. Turn on
Bulb will flash on and off 3 times if it has been successfully reset.

They forgot to mention the part where you just toss the bulb in the trash and buy a Philips Hue bulb instead.

[via Reddit]

Google Assistant can now control GE’s smart microwaves

GE's lineup of connected microwaves can now be controlled by the Google Assistant. Owners can use voice commands to set their microwave and perform basic functions like starting, pausing, stopping or adding time. The microwaves also have a "scan-to-c...

GE Appliances is looking for an Industrial Design Intern

ge_appliances_job

GE Appliances (a subsidiary of Haier) is one of the largest appliance brands in the United States, spanning the entire kitchen and home appliance industry. From refrigerators to freezers, cooking products, dishwashers, washers, dryers, air conditioners, water filtration systems, and water heaters, GE Appliances has electrified and modernized life for more than 125 years, relentlessly pursuing innovation, and in doing so, continues to build on its rich legacy of being one of America’s strongest and finest home-appliance makers.

THE OPPORTUNITY

GE Appliance’s Industrial Design Organization is a collaboration of Industrial and Interaction Designers, Consumer Insights Researchers, R&D Engineers, User Experience Research Specialists, and Model Makers. Interns are given the freedom and responsibility to contribute to the design team and experience every phase of the product development cycle through production launch.

A good part of our energetic creativity comes from being located in Louisville, KY. Known for horse racing and bourbon, Louisville is home to a vibrant music scene, unique shops and top-rated restaurants. From local makerspaces like our own GE Appliances FirstBuild, to monthly Creative Mornings and Gallery Hops, we’re sure you don’t know Louisville like you think you do.

ABOUT THE POSITION

GE Appliances is hiring multiple Industrial Design Interns at Appliances Headquarters in Louisville KY.
• 12 Month Duration

• Paid Internship ($14-$21/Hour + the option to choose between full-furnished housing or $675/month taxable housing stipend)

• Relocation expenses reimbursed

• Beginning in late May/early June (flexible start date)

REQUIREMENTS

• CANNOT graduate before or during the internship period.

• Currently enrolled full-time in an accredited School/University in the US.

• Undergraduate or graduate students with a 3.2 GPA or higher

• Outstanding verbal and visual communication skills

• Excellent sketching capabilities

• Strong 2D-3D computer knowledge

• Illustrator

• Photoshop

• Solidworks preferred but not necessary

• Keyshot

HOW TO APPLY

If interested please e-mail your resume and portfolio PDF (6MB max) to:
IDOIntern.Recruitment@geappliances.com with the subject line “Industrial Design Internship (via Yanko Design)” by February 17th, 2019 or visit www.geappliances.com/design-interns

ADDITIONAL INFO

GE Appliances will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a background investigation and drug screen.

LOCATION

Louisville (Kentucky), USA.

CLICK HERE TO APPLY

Visit our Job Board to view similar jobs or to post a Job Opening.

GE adds color lightbulbs to its Made for Google range

GE unveiled its first Made-for-Google lightbulbs in October last year. Now, it's expanding the range to include full-color LEDs, accessories and smart wall switches, which, like the previous bulb release, can be used without an extra hub and controll...